Description
Stainless Steel Flexible Pump Connectors are designed for mechanical equipment to isolate vibration, relieve stresses, reduce noise, absorb small movements and to facilitate installation. Flexible pump connectors to use suppress vibration from pump, absorb intermittent lateral movements in pipelines and to compensate
subsidence when pipelines cross building movement lines.
Stainless Steel Flexible Pump Connectors are manufacturing in austenitic steel ANSI 321 (DIN EN 1.4541) & ANSI 316L (DIN EN 1.4404) grades with over ANSI 304 (DIN EN 1.4301) / ANSI 316L (DIN EN 1.4404) single or double wire braided. Hoses conform to BS 6501. Part-1:2004/ISO 10380: 2012.
Note:
- Flexible pump connector are designed the test pressure is 1.5 times of the max. Working pressure.
- The burst pressure is 4 times of the working pressure.
- They are use for full vacuum and operating temperature of -200° C to +550°C
- Flexible Pump Connectors are not suitable for absorbing AXIAL Movement.
- We are also manufacturing higher pressure Pump Connectors as per customer’s specification.
Advantages of Flexible pump connector:
- Absorbs misalignment, vibration and sound.
- Withstands high pressure.
- Excellent corrosion-resistance.
- Excellent for use with moderate many solvents, chemicals, most oils and grease.
